PL EN
Utilization of Sodium Chloride Solutions to Obtain Ferrous Chlorides
 
Więcej
Ukryj
1
Igor Sikorsky Kyiv Polytechnic Institute, Peremogy Avenu 37/4, 03056 Kyiv, Ukraine
 
2
Oles Honchar Dnipro National University, Gagarin avenue 72, 49010 Dnipro city, Ukraine
 
 
Data publikacji: 01-11-2020
 
 
Autor do korespondencji
Tetyana Shabliy   

Igor Sikorsky Kyiv Polytechnic Institute, Peremogy Avenu 37/4, 03056 Kyiv, Ukraine
 
 
J. Ecol. Eng. 2020; 21(8):177-184
 
SŁOWA KLUCZOWE
DZIEDZINY
 
STRESZCZENIE
In this work, the processes of electrochemical processing of sodium chloride solutions with the production of iron (III) chloride and alkali in a three-chamber electrolyzer with MA-41 anion-exchange membrane and MK-40 cation-exchange membrane were investigated. The conditions for the removal of sodium chloride from water in a three-chamber electrolyzer using an iron anode are determined depending on the anode current density and the reaction of the medium in the anode region. The established parameters of the process of concentrating iron chloride in the anode region at relatively low concentrations of sodium chloride solution. It was shown that during the electrolysis of a sodium chloride solution with a concentration of 370 mg-eq/dm3 at a current of 0.2 A in a three-chamber electrolyzer with an iron anode, an iron chloride solution is formed in the anolyte at pH <4.9. As the current density increases, the rate of concentration of NaOH to catholyte and FeCl3 to anolyte increases. It was found that in order to increase the concentration of iron (III) chloride in the anolyte at relatively low concentrations of sodium chloride solution, it is advisable to gradually renew the demineralized solutions in the working chamber for the initial.
Journals System - logo
Scroll to top