Electrochemical Purification of Oil-Containing Shipping Waters
Więcej
Ukryj
1
Department of Ecology and Technology of Plant Polymers, Faculty of Chemical Engineering, Igor Sikorsky Kyiv Polytechnic Institute, Peremogy Avenu 37/4, 03056 Kyiv, Ukraine
Autor do korespondencji
Tetyana Shabliy
Department of Ecology and Technology of Plant Polymers, Faculty of Chemical Engineering, Igor Sikorsky Kyiv Polytechnic Institute, Peremogy Avenu 37/4, 03056 Kyiv, Ukraine
J. Ecol. Eng. 2023; 24(7):246-253
SŁOWA KLUCZOWE
DZIEDZINY
STRESZCZENIE
The article describes the modern problems of formation and purification of marine oil-containing waters. The efficiency of using electrocoagulation to remove oil from water-oil emulsions of different mineralization using aluminum and iron anodes was studied. Treatment of water-oil solutions with an oil content of 100 mg/dm3 by electrocoagulation in a single-chamber electrolyzer provides 98–99 % oil removal using these electrodes at an anode current density of 0.57–2.11 A/dm2 for highly mineralized waters and 0.34 A/dm2 for freshwater treatment during the first 15 minutes provides a reduction in oil concentration from 100 mg/dm3 to values at the level of 1.55–2.93 mg/dm3. When extending the water treatment time to 45 minutes, greater efficiency in highly mineralized waters is provided by the aluminum anode