CHEMICAL INTERACTIONS TO CLEANUP HIGHLY POLLUTED AUTOMOBILE SERVICE STATION WASTEWATER BY BIOADSORPTION-COAGULATION-FLOCCULATION
Więcej
Ukryj
1
Department of Environmental Engineering, Universidad Agraria del Ecuador, Av. 25 de Julio y Pio Jaramillo, 59304 Guayaquil (Guayas), Ecuador
2
Department of Environmental Engineering, Universidad de Las Américas (UDLA), Av. de los Granados & J. Queri, 59302, Quito, Ecuador
Data publikacji: 01-01-2017
Autor do korespondencji
Carlos Banchon
Department of Environmental Engineering, Universidad Agraria del Ecuador, Av. 25 de Julio y Pio Jaramillo, 59304 Guayaquil (Guayas), Ecuador
J. Ecol. Eng. 2017; 18(1):1-10
SŁOWA KLUCZOWE
DZIEDZINY
STRESZCZENIE
The present study addresses an ecofriendly solution to treat automobile service stations effluents with high concentrations of oily substances, surfactants, organic matter and heavy metals. Bioadsorption using sawdust from pine trees, sugar cane bagasse and coconut coir without any chemical modification removed colloidal contamination up to 70%. Polyaluminium chloride, ferric chloride and polyacrylamide were applied to remove dissolved and colloidal pollutants under saline conditions without change of initial pH. Both bioadsorption and coagulation-flocculation removed up to 97.8% of BOD, COD, surfactants and heavy metals at a saline concentration of 1.5% NaCl. The increase of ionic strength promoted a high sludge index and a representative cost saving in chemicals consumption of almost 70%. High levels of pollution removal with the minimal use of chemicals is herein presented.