PL EN
ZEOLITIZATION OF SEWAGE SLUDGE ASH WITH A FUSION METHOD
 
Więcej
Ukryj
1
Faculty of Environmental, Geomatic and Energy Engineering, Kielce University of Technology, Kielce, Al. Tysiąclecia Państwa Polskiego 7, 25-314 Kielce, Poland
 
 
Data publikacji: 01-11-2016
 
 
J. Ecol. Eng. 2016; 17(5):138-146
 
SŁOWA KLUCZOWE
STRESZCZENIE
The study shows the results of zeolitization of municipal sewage sludge ash with the indirect fusion method followed by a hydrothermal method. The zeolitization of sewage sludge ash was conducted at the melting temperature of 550°C and the melting time of 60 minutes, crystallization temperatures of 60°C and 90°C, crystallization time of 6 hours and the SSA:NaOH ratio of 1:1.8; 1:1.4. The research of modified sewage sludge ashes included the observation of changes of ash particles surface and the identification of crystalized phases. The zeolitization of sewage sludge ash at the ratio of SSA:NaOH 1.0:1.4 did not cause the formation of zeolite phases. On the other hand, the zeolitization at the ratio of SSA:NaOH 1.0:1.8 resulted in the formation of desired zeolite phases such as zeolite Y (faujasite) and hydroxysodalite. The presented method of sewage sludge ash zeolitization allows to obtain highly usable material. Synthesized zeolites may be used as adsorbents and ion exchangers. They can be potentially used to remove heavy metals as well as ammonia from water and wastewater.
Journals System - logo
Scroll to top